Vaping cannabis can be a great way to enjoy the benefits of cannabis without the need to smoke. While store-bought cannabis vape juice can be expensive and hard to find, making your own homemade cannabis vape juice is an easy and cost-efficient solution. In this article, we’ll provide a step-by-step guide on how to make your own homemade cannabis vape juice. From gathering the necessary ingredients to the final steps for enjoying your homemade vape juice, this guide will walk you through the entire process. So, let’s get started!

What supplies are needed to make cannabis vape juice?

To make cannabis vape juice, you will need vegetable glycerin, propylene glycol, cannabis extract, and a mixing container. You may also want to add a few drops of flavoring to make your vape juice more enjoyable.

How long does it take to make cannabis vape juice?

It typically takes about 30 minutes to make cannabis vape juice. You’ll need to gather all of your ingredients, mix them together, and then wait for the mixture to steep. The steeping time will vary depending on the recipe, but it can range from several hours to several days.

What ingredients are needed to make cannabis vape juice?

To make cannabis vape juice, you will need a cannabis concentrate such as wax, shatter, budder, or oil, vegetable glycerin, propylene glycol, and a flavor of your choice (optional). You can also add terpenes to enhance the flavor and effects of your vape juice.

What is the best way to extract CBD from cannabis for vape juice?

The best way to extract CBD from cannabis for vape juice is to use a solvent like propylene glycol or vegetable glycerin. Then, use a closed loop extraction system to carefully extract the CBD oil from the cannabis. Finally, use a distillation process to refine the oil, then add it to your vape juice.

Are there any safety precautions that must be taken when making cannabis vape juice?

Yes, there are a few important safety precautions that must be taken when making cannabis vape juice. Make sure to wear gloves and protective eyewear when handling the cannabis, and use a dedicated work area away from open flames. Additionally, keep all ingredients and supplies away from children and pets, and ensure that all containers are properly labeled.

That being said, there is a way to take cannabis vaping to the next level DIY style. You need to make sure that all the ingredients you use in your vape juice are of food-grade quality, and that you do your homework to ensure you avoid any dodgy products that could be harmful to your health. As long as you are careful and take the proper safety precautions, creating your own supply of vape juice will be a breeze. Before we walk you through making your own cannabis e-liquid, we first need to define it. At its most basic, vape juice is a substance you insert into a vape pen or e-cigarette. The liquid contains flavour and nicotine optional , which heats up when the vape is in use and turns into a vapour, which is then inhaled. Many smokers turn to vaping e-liquid containing nicotine as it still delivers nicotine to the body without the unpleasant odour, taste and toxins of a regular cigarette. However, not everyone vapes nicotine vape juice. Many people enjoy vaping nicotine-free e-liquid and cannabis e-liquid. THC vape juice is especially popular. No matter which type is used, e-liquids allow vapers to experiment with different flavours, strengths and ingredients, especially if you make them yourself. If you have the patience, the long-term extraction method could be worth trying. Instead of using high temperatures, long-term extraction uses time to allow cannabinoids, such as THC and CBD, to diffuse into the mixture. This method is the longest, taking up to three months to complete. But besides taking quite a bit of time to finish, this method is nearly foolproof. Follow these instructions step by step to create premium THC vape juice using the long-term extraction method. Grind until they are relatively coarse, but even. Spread the ground buds evenly on the baking tray and cover with foil. Place the tray into the oven for about 30 minutes. This will decarboxylate them so that the THC in the strain is activated. While the decarboxylating process is taking place, it is time to mix your PG and VG. You can mix it to whatever percentage you want, but just keep in mind that you want a good balance of both. PG brings out the flavour of the e-liquid, while VG is what makes it viscous and creates thick clouds. Once the decarboxylating process is finished, remove the tray from the oven and let the buds cool. Once cooled, transfer buds to an airtight jar. Screw the lid on and store it in a cool, dark place such as a cupboard. Squeeze the liquid into a clean glass bottle. The cheesecloth is crucial as it acts as a filter to prevent bud particles from mixing with the final solution. While it is very similar to the long-term extraction method, this one uses heat to speed up the process. All you have to do is break up buds, mix with VG, and then apply heat. While the decarboxylating process takes place, it is time to mix your PG and VG, just like you would in step 4 of the long-term extraction method above. Take the tray out of the oven and let the buds cool. Add water to the biggest container of your double boiler, about half an inch deep. Then, add some water to the smaller container. Keep it at that level for about 1 hour or, if you want a more potent solution, leave it on for longer. Once you think the mixture is ready, remove the double boiler from the stovetop and allow the mixture to cool. Another quick way to make your own THC vape juice is the rosin extraction method. Rosin is a low-risk extract by nature, making this the cleanest way to make your own THC e-liquid. No solvents or harsh chemicals are used in this process. All you have to do is apply a little heat and pressure to extract the resin. You can even create rosin yourself using fresh buds. For this method, you press raw cannabis buds in your rosin press or hair straightener to create rosin wax. First, sandwich a compact bundle of cannabis buds in parchment paper. Once this is done, get your rosin press or hair straightener ready. Press the parchment paper containing the buds between the hot plates and squeeze hard. Continue applying force as the resin starts flowing. Keep repeating the process until you have about 0. Take the parchment-covered in rosin and stick it in the freezer for about 20 minutes. Once that time is up, remove the rosin covered paper and use a toothpick to scrape off the rosin. Next, you will want to add 1 ml of flavouring or terpenes whatever you choose to a glass vial or Pyrex glass, then add 0. You can make more if you want. Just keep the ratio of 1 ml of terpenes for every 0. The final step is heating the mixture, and there are various ways you can go about this. One option is holding a flame under the glass until the mixture boils and then mixing it. Alternatively, you can heat the glass container in a bowl with a small amount of boiling water until it can mix easily. We recommend using hot water as the lighter method can be dangerous. There are numerous benefits to making your own THC e-liquid, the most important being control.